# Comparing Ford F-150 Engines: EcoBoost V6 Versus Coyote V8 for Towing Analyzing torque, payload capacity, and real-world efficiency between Ford's primary engine configurations. - **Source:** [SlashGear](https://www.slashgear.com) - **Published:** 2026-11-04 - **Topic:** [Business](https://brifing.si/c/business) - **Original article:** - **On Brifing:** https://brifing.si/s/72696067-ed14-43b0-902c-ed3f262fd757 ## Engine Lineup Overview The 2027 Ford F-150 offers three V6 EcoBoost configurations alongside the 5.0-liter Coyote V8. The 3.0-liter EcoBoost delivers 325 horsepower, while the 3.5-liter variant reaches 400 horsepower. The Coyote V8 provides 400 horsepower and 410 lb-ft of torque, with an optional dealer-installed supercharger available to enhance performance under factory warranty coverage. ## Towing Capacity Advantage The 3.5-liter EcoBoost V6 consistently outperforms the Coyote V8 in maximum towing and payload ratings. A 2027 F-150 SuperCrew 4X4 with the 3.5-liter engine reaches 13,500 pounds of conventional towing capacity. In comparison, the 5.0-liter Coyote V8 is limited to a 12,800-pound maximum rating, establishing a clear lead for the turbo-powered configuration. ## Payload Capacity Metrics Payload advantages mirror the towing results, favoring the EcoBoost architecture. Two-wheel drive F-150 models equipped with the 3.5-liter engine support up to 2,440 pounds of payload. The Coyote-powered equivalent offers a slightly lower capacity of 2,235 pounds. These figures demonstrate the structural and mechanical efficiency of the V6 platform for heavy-duty cargo hauling. ## EPA Fuel Economy Estimates EPA ratings suggest a marginal efficiency edge for the 3.5-liter EcoBoost, which achieves 20 mpg combined compared to 19 mpg for the Coyote V8 in two-wheel drive configurations. This difference equates to roughly 0.3 gallons per 100 miles, representing a minor cost saving of approximately $1.20 based on current fuel pricing. ## Real-World Towing Performance A 2024 comparison test involving an 8,000-pound trailer revealed distinct operational differences between the two engines. On uphill sections, the EcoBoost maintained speed in 6th gear at 3,100 rpm, while the Coyote required 5th gear at 3,600 rpm. These mechanical shifts highlight how turbocharging influences power delivery during sustained heavy load conditions. ## Efficiency Under Load Despite EPA estimates, real-world towing data shows the Coyote V8 can be more efficient under heavy stress. During a 120-mile loop, the Coyote averaged 7.1 mpg, whereas the EcoBoost returned 5.8 mpg. This indicates that the EcoBoost consumes significantly more fuel when generating the high torque required for pulling heavy trailers. ## Complexity and Maintenance The Coyote V8 offers a simpler mechanical design compared to the twin-turbocharged EcoBoost V6. While the EcoBoost relies on turbochargers to generate necessary towing torque, this increased complexity often results in higher long-term maintenance and repair costs. Owners prioritizing simplicity and reduced mechanical overhead may find the naturally aspirated V8 more appealing. ## Strategic Selection Summary Choosing between these engines depends on specific towing requirements versus long-term ownership costs. The 3.5-liter EcoBoost provides superior raw towing and payload capacity, making it the functional choice for maximum hauling. Conversely, the Coyote V8 offers a simpler, potentially more reliable powertrain that maintains better fuel efficiency during actual heavy-duty towing operations. ## Sources covering this story - https://www.slashgear.com/2301194/which-ford-f-150-engine-better-towing-ecoboost-v6-vs-coyote-v8/ — --- _Summary written by Brifing from the original reporting. Copyright in the original article belongs to its publisher; read the full piece at the link above._