# Formlabs Enters Consumer Market With Six Hundred Ninety-Nine Dollar Resin Printer

The Form Studio 1 introduces affordable stereolithography designed for desktop use.

- **Source:** [Wired](https://www.wired.com)
- **Published:** 2026-10-14
- **Topic:** [Business](https://brifing.si/c/business)
- **Original article:** <https://www.wired.com/story/formlabs-has-a-3d-printer-for-normies/>
- **On Brifing:** https://brifing.si/s/b6b75427-fe2b-4dd2-ac31-4c72c64f8d2a

## Targeting Desktop Users

Formlabs has officially announced the Form Studio 1, priced at $699, marking its first consumer-oriented stereolithography device. Historically, the company targeted enterprise clients, assembly shops, and dentists with hardware starting at $2,300 or more. This release opens professional-grade resin printing to casual creators and home users directly.

## Upgraded Optical Architecture

Departing from common consumer LCD masking approaches, the machine uses a specialized backlight system featuring 28 LEDs with individual lenses to focus ultraviolet light. The hardware achieves vertical print speeds of up to 130 millimeters per hour, claiming an internal print failure rate of roughly 2 percent.

## Certified Low-Emission Materials

To mitigate traditional toxic fumes and chemical smells, Formlabs introduced proprietary Alpha Resins holding UL GreenGuard Gold certifications. Individual resin cartridges start at $29. While third-party materials remain fully supported, company executives highlight that proprietary cartridges deliver near odor-free operation suitable for standard residential spaces.

## Essential Post-Processing Ecosystem

SLA printing requires multi-step post-processing, demanding substantial desk space comparable to a minifridge. Formlabs launched a dedicated wash and cure station for roughly $200 alongside an optional $180 VOC extractor. These accessories remove uncured resin and stabilize models without requiring complex chemical drainage setups at home.

## Automated Cartridge Management

The hardware integrates a specialized cartridge loading system that continuously monitors resin levels in the tank. This mechanism allows mid-print cartridge swapping to prevent job interruptions. Users can control active jobs, monitor progress, and send designs remotely using the newly integrated Form Mobile companion application.

## Founders Edition Options

At launch, Formlabs offers limited Founders Edition models across four colors, with an optional flexible build plate bundle retailing for $750. The modular build platforms and swappable resin tanks allow users to switch materials rapidly without pouring toxic liquid back into storage bottles manually.

## Real-World Benchmark Times

Early testing demonstrates rapid output capabilities, producing Raspberry Pi protective cases in approximately eight minutes and custom equipment covers within 17 minutes. The enclosed hardware operates quietly, releasing noticeable chemical odors only when opening the translucent orange hood immediately after a completed fabrication cycle.

## Strategic Consumer Pivot

With nearly 200,000 professional printers deployed globally, Formlabs is leveraging existing industrial expertise to capture the desktop hobbyist segment. Lowering material costs to $29 per bottle directly pressures low-cost competitors, making high-resolution resin fabrication accessible without demanding dedicated workshop ventilation or expensive commercial infrastructure.

## Sources covering this story

- [Wired — Formlabs Launches Form Studio 1 Consumer SLA 3D Printer](https://www.wired.com/story/formlabs-has-a-3d-printer-for-normies/)
- [CNET — Formlabs Unveils Form Studio 1 to Bring Safe Resin 3D Printing Home](https://www.cnet.com/tech/computing/formlabs-just-announced-the-first-resin-printer-aimed-at-safe-home-use/)

---

_Summary written by Brifing from the original reporting. Copyright in the original article belongs to its publisher; read the full piece at the link above._