# Kobalt Power Tool Recalls: Safety Hazards and How to Check Your Gear

Identify dangerous Kobalt tools and follow official procedures to secure free repairs or replacements.

- **Source:** [How-To Geek](https://www.howtogeek.com)
- **Published:** 2026-11-07
- **Topic:** [Business](https://brifing.si/c/business)
- **Original article:** <https://www.howtogeek.com/kobalt-tools-you-didnt-know-were-recalled-and-what-to-do-if-you-own-them/>
- **On Brifing:** https://brifing.si/s/bc55c106-5e3c-4168-b75d-c3f084849c7e

## Widespread Safety Recalls

Product recalls often go unnoticed by busy consumers, leading to potential safety hazards in home workshops. Popular Kobalt tools sold at Lowe's, including chainsaws and blowers, have faced multiple safety-related recalls. Owners should verify their equipment model numbers against official lists to ensure their tools do not pose fire or injury risks.

## USB-C Battery Fire Risk

A July 9, 2026, recall affects Kobalt 24V and 48V trimmers, blowers, and mowers using USB-C batteries. Charging these batteries while installed in the device can trigger a short circuit, potentially causing a fire. Users should immediately stop using these batteries and submit a claim through the official Greenworks battery recall portal.

## Identifying Affected Blowers

Several Kobalt blowers are included in the recent USB-C battery recall. If you own a 270-CFM blower, check for model KHB 324-06. Those included in the KOC 1024-06 combo kit should look for model KHB 2524-06. Both units utilize the KB 324-06 3.0Ah battery, which is the primary component requiring immediate attention.

## Chainsaw Switch Malfunctions

A September 2020 recall identified a defect in 12-inch Kobalt chainsaws where internal switch contacts can weld together. This failure prevents the tool from turning off, creating a severe laceration risk. Approximately 150,000 units are affected, with model numbers KCS 120-07 or KCS 120, manufactured between November 2013 and March 2020, requiring urgent inspection.

## Pole Saw Safety Concerns

Certain Kobalt 40V pole saws were recalled in September 2020 due to a trigger defect that causes the motor to continue running after release. While no injuries were reported, the recall covers over 100,000 units. Owners should inspect the guide bar near the oil cap for specific model numbers and contact support.

## Legacy Mower Circuit Issues

Older Kobalt 20-inch dual-blade push mowers from a May 2017 recall pose fire hazards due to faulty circuit boards. Owners must immediately remove the battery to prevent potential ignition. Although no longer on the standard claim form, owners can reach out to the provided CPSC contact number for repair guidance and assistance.

## Verification and Repair Steps

To check if your tool is affected, locate the model number on the device's label, often found on the rear handle or near the oil cap. If your tool matches the recall criteria, stop using it immediately. Visit the Greenworks recall website or call the manufacturer to arrange for necessary repairs.

## Proactive Safety Maintenance

Recalls are a standard part of consumer hardware life, yet they are frequently overlooked by owners. Regularly auditing your garage tools for safety notices is essential for preventing accidents. Beyond Kobalt, other major brands like Ryobi also issue periodic recalls, making it vital to stay informed about all your power equipment.

## Sources covering this story

- https://www.howtogeek.com/kobalt-tools-you-didnt-know-were-recalled-and-what-to-do-if-you-own-them/ — 

---

_Summary written by Brifing from the original reporting. Copyright in the original article belongs to its publisher; read the full piece at the link above._