# Sri Lankan Temples Inspire Handcrafted Ceramic Lighting Collection Bouti Studio transforms the architecture of Sri Lankan temples into minimalist lighting objects. - **Source:** [design archives | designboom | architecture & design magazine](https://brifing.si/source/11868f8d-1e20-41ac-bc2d-8c5af32d721b) - **Published:** 2026-07-27 - **Topic:** [Design & UX](https://brifing.si/c/design) - **Original article:** - **On Brifing:** https://brifing.si/s/efa74280-82b5-4bc8-8466-62f55066b5a8 ## Architectural Influence of Sri Lankan Temples Bouti Studio's Temple lighting collection draws inspiration from the architecture of Sri Lankan temples and the ascent of Adam's Peak. Defined by geometric forms, integrated openings, and a restrained material language, the collection translates architectural and atmospheric qualities into minimalist lighting objects. ## Conceptual Starting Point from Adam's Peak At Adam's Peak, approximately 5,000 steps lead visitors to gather and watch the sunrise. The climb culminates with a large bell at the summit. This sequence of climbing, gathering, and quiet observation forms the conceptual foundation of the Temple collection. ## Three Lighting Objects, One Shared Language Bouti Studio's collection comprises three lighting typologies developed through a shared formal language. The table lamp, the most substantial piece, offers a sculptural form, while the wall light and portable lamp are adapted for different uses. ## Hand Drawing and Digital Modeling Each piece begins with a combination of hand drawing and digital modeling. The form is first sketched and then developed three-dimensionally, allowing for the refinement of aesthetic and functional properties throughout the design process. ## Ceramic Production Process The digital model is 3D printed to create a plaster mold. Liquid faience is poured into the mold, capturing the geometry of the form. After the mold is removed, the raw clay is cut and finished by hand. The pieces undergo an initial firing at 1,020°C followed by a second firing at 1,040°C. ## Final Touches of the Collection The collection is produced in France and hand-shaped in Bouti Studio's workshop. Each piece is made ready for private clients and interior designers. This process reflects the fusion of traditional craftsmanship with modern technology. ## Sources covering this story - https://www.designboom.com/design/sri-lankan-temples-handcrafted-ceramic-lighting-bouti-studio/ — --- _Summary written by Brifing from the original reporting. Copyright in the original article belongs to its publisher; read the full piece at the link above._